USB C Console Cable USB C to RJ45 Cable

Console Configuration Cable

The Cable USB-C to RJ45 Console Cable connects from a computer USB-C port to the RJ45 console port of a networking switch or router.

This rollover cable connects a laptop with Windows, Linux or macOS to a standard serial console port for configuration and management.

The integrated FTDI chipset handles the USB signaling and protocol functions including an RS-232 level shifter. FTDI drivers are available for download.

Specifications

Host Connector: USB-C Male

 Console Port Connector: RJ45 Male

 Chipset: FTDI USB to serial UART

Console Cable Functions

Directly connect to a console port on a network switch

FTDI drivers are integrated into the latest versions of Windows 10 and macOS Configure a switch or router with direct terminal access from your computer Important Notes

NOT a crossover cable that reverses TX and RX

Will NOT operate over an Ethernet port for internet access

Rollover Cable

Rollover cable reverses all 8 pins to connect from a computer to a network switch

standard wiring pin-out (check the requirements of your equipment)

Data transfer rate up to 250 Kbps

Bus powered cable

Features: 1. Full support for Windows, MAC and Linux, the detailed listed as followed. 2. Microsoft (HCL) certified to be compatible with Windows, no CD needed because the drivers are part of the OS. 3. Supports hardware flow control used to implement the break sequence. 4. FTDI FT232R chip + RS232 Level Shifter. 5. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity. Supported Operating System: Drivers are available which allow USB FTDI devices to work with the following operating systems: Windows 10 x32 · Windows 10 x64 · Windows 8 x32 · Windows 8 x64 · Windows Server 2008 R2 x64 · Windows 7 x32 · Windows 7 x64 · Windows Server 2008 · Windows Server 2008 x64 · Windows Vista x32 · Windows