Cart

Your Cart is Empty

Back To Shop

Micro USB & Mini USB Dash Cam

(10 customer reviews)

37,02 $

15ft Micro USB & Mini USB Dash Cam &Type-C Hardwire Kit w. Mini(ACS)/LP Mini(ACN)/ATO(ATC or ACU)/Micro2(ACZ) Fuse, Micro to Mini/USB-C Port Adapters & 11.9V Real Battery Drain Protection : Electronics

delivery between 2024/09/10 - 2024/09/13
  •  basically fit for ALL Dash Cams like Rexing, ROAV, Zero Edge, Anker, DDPai, Papago etc(not compatible with Garmin). Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has both left handed and right handed mini USB adapters.
  • ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
  • BATTERY DRAIN PROTECTION SYSTEM: For our 2019 updated version, we increased our cutoff voltage from 11.8V to 12V to protect vehicle battery voltage from dropping below 11.9V and not starting up. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Find another listing B0787LD92N if you need different or adjustable cutoff voltage.
  • EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
  • WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
Size

Micro&Mini, 2 Set Micro

10 reviews for Micro USB & Mini USB Dash Cam

5.0
Based on 10 reviews
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-5 of 10 reviews
  1. Well, my Dash Cam cigarette plug didn’t work any more. Instead of buying replacement for about same price, I decided to try this fuse tap kit to hard wire the unit. This will free up my SUV cigarette plug for my cell phone charger, which is a plus.After reseaching, I went with this kit because it has everything plus more. The micro to mini is what I needed for my dash cam to work. Also the 4 different fuse tap will allow me to easily move this kit to another vehicle faster if needed.The install was straightforward for me because I do a lot of DIY project. But anyone with basic electrical knowledge should be able to install this plug and play kit. I decided to install on the accessory fuse so that the power is off when vehicle is off. Even though this kit has build in power cut off, my dash cam don’t have parking surveillance. Just make sure to put the vehicle original fuse on the bottom of the tap and the supply fuse to top tap where the red power wire that will connect to the supplied 15 feet wire with black box and your good to go. The fuse was kinda hard to push into the tap so be careful not to break it.Overall this kit is a great value for everything that’s included. I ended up buying a second kit to use in another car.

  2. I tried this on my 2013 Sonata and it worked great with my new REDTIGER F7N. The videos on how to install this unit are very useful. There are 2 videos, one refers to older versions and one that refers to newer versions, you have to watch both because there is some information that doesn’t get repeated on the second video presuming you’ve seen the first. I used this for over a week and I found out that this unit kept my camera running non-stop until the battery protection was triggered which I have to say worked every time and my car was able to start even in the coldest weather so you can trust that feature. The problem is that this camera has only 2 wires and I had connected the red wire on a constant 12V which kept it running constantly and I didn’t know then that I needed a unit with 3 wires where one could be connected to Ground, 1 to a Constant 12V and the other to a 12V after key/ignition to use the Parking Monitor feature. So I learned that the choices with this unit are to either connected to constant 12V and let it run constantly until 11.9V protection is triggered or connect it to a non-constant 12 volt which will make the camera start automatically on turning the key and stop automatically on removing the key.This unit worked great I just wished it had all 3 wires.

  3. Very easy to install, use with VAVA dash cam.

  4. Bought this for a backup camera (auto-vox). Had installed at best buy. This wire kit was needed in order to hook camera directly to your car battery and bypass the cigarette lighter/power . The reason you’d want to connect to your car battery is two reasons (1 – doesn’t tie up your car power port or make you buy an double power port option and 2 – only this hooking up to battery option allows the forward camera to record when car is off for burglars/vandalism events – if hooked up to car cigarette port then that usually only has power when car is on – as was my van’s case). Fit honda odyssey & CRV just fine.Another tip if using the katabar wire – use an empty car fuse slot – do not piggy back with the Katabar wire as it blew the fuse for me on automatic seat. When put by itself worked fine. Meaning this kit plugs into a car fuse slot and allows you to put an existing fuse in it’s extender – but that’s when my fuse blew – so picking an empty slot worked.Here is the katabar wire description that Amazon had for sale that I bought. I bought 2 and one had a defective micro to mini adapter and had to buy another adapter to make it work (which Amazon helped with) – the vendor also sent me a wire replacement that went direct to mini USB but it arrived too late to swap out. If the other adapter ever fails I’ll have it as a backup – vendor did respond and sent part to fix if needed:MicroUSB & MiniUSB Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters, Battery Drain Protection System, 15ft Length Cord for Dash Cameras

  5. This hardwire kit was a great price and super easy to install with the cabin fuse box. Powers my dash camera right up and have had no issues.

Add a review
You must be logged in to post a review Log In
SKU: N/A Categories: ,

Cart

Your Cart is Empty

Back To Shop